How to Build an Indoor Wall Fountains

May 18th

Indoor wall fountains bring serenity along with the soothing sound of flowing water to any room in your house.

new indoor wall fountains
new indoor wall fountains

Instructions of build an indoor wall fountains:

12 Photos Gallery of: How to Build an Indoor Wall Fountains

Image of: new indoor wall fountains
Image of: indoor wall fountains image
Image of: indoor wall fountains ideas
Image of: indoor wall fountains 2014
Image of: contemporary indoor wall fountains
Image of: indoor wall fountains picture
Image of: water and indoor wall fountains
Image of: Best of indoor wall fountains
Image of: Indoor Wall Water Feature
Image of: Indoor wall water fountain
Image of: Indoor Wall Fountains Vertical River
Image of: Indoor Wall Fountains
 
  1. Put the Plexiglas plate on a flat surface. Applying waterproof adhesive on the back of a piece of slate and press it firmly into a corner of Plexiglas. The liquid silicone is a good choice for this project, but any strong waterproof adhesive also serve
  2. Located on the floor in front of the indoor wall fountains copper pot 4 by 2 feet (122 by 61 cm). If it has drainage holes, seal them with plumber’s putty so that water is retained.
  3. Place the Plexiglas slate tiling inside the copper pot, after the adhesive is completely set. Place the two large river rocks in a container in front of the wall board
  4. Place the fountain pump inside the copper pot and connecting plastic tubing that comes with it. Install the power cord for the external back of the pot and the plastic tube extending from the rear wall of slate Cover the top of the slate wall with copper pot turned upside down. Paste the pot to the wall with adhesive.