The stone fireplaces give warmth and coziness to any room, but installation by a professional mason can be expensive. One solution is to add a facade in a prefab fireplace, which will give a rustic quality to the process room without costing you a fortune. Install fine stone tiles on prefabricated chimney instead of whole stones also lets you create a fireplace with stone surface using only a few materials and minimal experience.
Sand the surface of the prefab fireplace using sandpaper medium grain, which will remove scratchy or uneven areas. Brush the dust and debris of the fire caused by sanding using a flat brush 2 inches (5.08 cm).
12 Photos Gallery of: How To Decorate Prefab Fireplace
Spread a layer of 1/2 inch thick (1.27 cm ) of slurry over the entire surface of the prefab fireplace like place where the stones using a mortar .Spend a rake grout on the surface of the chimney cover the grout to scratch or scrape the surface. This allows the stone tiles are more easily you adhere to the fireplace.
Press tiles stone quarter inch (0.64 cm) thick to half the deck surface grout spacing stone tiles with a gap of 1/4 inch (0.64 cm). Excess grout push through the section between individual stone tiles.